Dhalle M., Chaud X., Senatore C., Song J., Fazilleau P., Debray F., Lecrevisse T., Herrmannsdorfer T., Smara A., Paillot K.
Ключевые слова: hybrid systems, coils insert, HTS, REBCO, tapes, coils outer, magnets resistive, modeling, critical current
Chaud X., Li Y., Selvamanickam V., Galstyan E., Chen S., Song J., Schmidt R., Jaroszynski J., Abraimov D., Majkic G., Bradford G., Sandra J.S., Paidpilli M., Goel C., Yerraguravagari V., Jain R., Kadiyala J.
Eisterer M., Chaud X., Tomsic M., Prikhna T.A., Moshchil V.E., Sverdun V.B., Rabier J., Rindfleisch M., Shapovalov A.P., Kasatkin A.L., Shaternik A.V., Romaka V.V., Ponomaryov S.S., Jouline A.
Chaud X., Hopkins S.C., Senatore C., Buta F., Bordini B., Ballarino A., Bonura M., Bovone G., Matera D.
Eisterer M., Chaud X., Tomsic M., Rabier J., Rindfleisch M., Prikhna T., Moshchil V., Shapovalov A., Kasatkin A., Jouline A., Ponomaryov S.
Ключевые слова: HTS, YBCO, bulk, texture, melting, MgB2, thin films, bulk, wires round, microstructure, critical current, Jc/B curves, pinning force, experimental results
Ключевые слова: high field magnets, hybrid systems, coils outer, magnets resistive, coils insert, coils solenoidal, design parameters, HTS, REBCO, coated conductors, quench protection, winding techniques, cryogenic systems, helium liquid, insulating medium, fabrication, critical caracteristics, critical current, induction, test results
Chaud X., Pan A.V., Habisreuther T., Prikhna T.A., Rabier J., Joulain A., Moshchill V.E., Litskendorf D.
Ключевые слова: HTS, YBCO, bulk, melting, texture, microstructure, dislocations, twin boundaries, stacking fault, fabrication, critical caracteristics, Jc/B curves, pinning force, experimental results
Chaud X., Larbalestier D.C., Tarantini C., Ballarino A., Lee P.J., Falorio I., Barth C., Segal C., Zurita A.C.
Chaud X., Senatore C., Giannini E., Buta F., Leboeuf D., Bonura M., Matera D., Cerny R., Walker S.M.
Iijima Y., Osamura K., Breschi M., Chaud X., Nishijima G., Zhang Y., Koizumi T., Nagaishi T., Fukushima T., Shin H.*10, Kiss T.*11
Tixador P., Chaud X., Takahashi K., Awaji S., Fazilleau P., Badel A., Lecrevisse T., Borgnolutti F., Benkel T., Richel N.
Ключевые слова: hybrid systems, HTS, coils insert, REBCO, coated conductors, high field magnets, test results, coils pancake, design parameters, critical caracteristics, critical current, angular dependence, magnetic field dependence, magnetic field distribution, critical current distribution, tensile tests, mechanical properties, stress effects
Eisterer M., Weber H.W., Chaud X., Gawalek W., Sokolovsky V., Goldacker W., Habisreuther T., Rabier J., Wu M., Prikhna T., Joulain A., Moshchil V., Kozyrev A., Shapovalov A., Shaternik A., *5Litzkendorf D., Shaternik V., Grechnev G.*10, Boutko V.*11, Gusev A.*11, Barvitskiy P.
Ключевые слова: MgB2, HTS, YBCO, bulk, pinning, trapped field, comparison, fabrication, high pressure processing, microstructure, critical caracteristics, Jc/B curves
Chaud X., Awaji S., Watanabe K., Sugimoto M., Nimori S., Hanai S., Oguro H., Shimizu T., Miyoshi Y., Tsubouchi H., Omura T.
Ключевые слова: HTS, YBCO, bulk, powder metallurgy, melting, in-situ process, phase formation, susceptibility, fabrication, experimental results
Tixador P., Chaud X., Fazilleau P., Miyoshi Y., Debray F., Rey J., Badel A., Lecrevisse T., Devaux M., Vincent B., Benkel T., Marpaud J.
Chaud X., Sotelo G.G., Noudem J.G., Dias D.H., Bernstein P., Kenfaui D., Moyses L.A., Telles L.G., Aburas M*3.
Ключевые слова: HTS, YBCO, bulk, holes, bearing magnetic, texture, levitation performance, trapped field distribution, fabrication, experimental results
Ключевые слова: HTS, Bi2212, strands, mechanical reinforcement, wires round, critical caracteristics, current-voltage characteristics
Ключевые слова: HTS, YBCO, bulk, magnets, trapped field, thermomagnetic instability, mechanical properties, experimental results
Eisterer M., Weber H.W., Chaud X., Gawalek W., Sokolovsky V., Goldacker W., Noudem J., Prikhna T., Moshchil V., Sverdun V., Kozyrev A., Karpets M., Kovylaev V., Borimskiy A., Basyuk T., Prisyazhnaya E.
Ключевые слова: MgB2, bulk, fabrication, sintering, densification, microstructure, trapped field, temperature dependence, critical caracteristics, Jc/B curves
Tixador P., Chaud X., Nishijima G., Awaji S., Watanabe K., Saito T., Hanai S., Oguro H., Marukawa K., Suzuki T., Sakamoto H., Miyoshi Y., Debray F., Inoue I., Daibo M., Suwa T.
Ключевые слова: HTS, REBCO, YBCO, coated conductors, coils pancake, mechanical properties, stress effects, impregnation, deformation, design parameters, critical caracteristics, critical current, magnetic field dependence, current-voltage characteristics, magnetic field distribution, strain effects, stress distribution
Ключевые слова: SMES, HTS, YBCO, coated conductors, coils solenoidal, mechanical properties, stress effects, power equipment, economic analysis, modeling, numerical analysis
Eisterer M., Weber H.W., Chaud X., Gawalek W., Sokolovsky V., Habisreuther T., Noudem J., Rabier J., Prikhna T., Joulain A., Moshchil V., Sverdun V., Kozyrev A., Karpets M., Kovylaev V., Kuznietsov R.
Tixador P., Chaud X., Nishijima G., Awaji S., Watanabe K., Kitaguchi H., Oguro H., Miyoshi Y., Debray F., Lecrevisse T., Rey J.-M., Vincent B.
Tixador P., Volpini G., Chaud X., Sorbi M., Bertinelli F., Fazilleau P., Stenvall A., Debray F., Mayri C., Lecrevisse T., Pottier F., Rey J.-M., Devaux M., Pes C., Durante M., Favre G., Tudela J.-M., Tardy T.
Ключевые слова: HTS, magnets dipole, YBCO, coated conductors, coils insert, LTS, Nb3Sn, accelerator magnets, design, test results, prototype, high field magnets
Ключевые слова: HTS, YBCO, bulk, fabrication, oxygenation treatments, pressure dependence, single-domain, trapped field distribution, trapped field
Tixador P., Chaud X., Juster F.P., Fazilleau P., Miyoshi Y., Debray F., Lecrevisse T., Rey J.-M., Devaux M., Vincent B.
Ключевые слова: HTS, YBCO, coated conductors, coils pancake, quench propagation, experimental results, numerical analysis, voltage, time evolution
Eisterer M., Weber H.W., Chaud X., Gawalek W., Sokolovsky V., Habisreuther T., Noudem J., Prikhna T., Moshchil V., Kozyrev A.
Ключевые слова: MgB2, bulk, fabrication, pressure dependence, heat treatment, pinning, microstructure, grain boundaries, pinning force, critical caracteristics, Jc/B curves, doping effect
Ключевые слова: HTS, YBCO, bulk, single-domain, fabrication, magnets, trapped field, time evolution, trapped field distribution, temperature dependence, experimental results
Tixador P., Chaud X., Mossang E., Bruzek C., Debray F., Ronayette L., Rey J., Lecrevisse T., Brosse-Maron P., Vialle A.
Tixador P., Chaud X., Semperger S., Nguyen N.T., Debray F., Trophime C., Lecrevisse T., Rey J.M., Reinbold V., Devaux M., Pes C.
Ключевые слова: SMES, HTS, YBCO, coated conductors, coils solenoidal, mechanical properties, stress effects, coils pancake, experimental results, power equipment
Ключевые слова: HTS, bulk, YBCO, perforated sample structure, single-domain, fabrication, trapped field distribution, microstructure, reinforcement, magnets permanent
Ключевые слова: HTS, YBCO, bulk, single-domain, holes, magnets permanent, trapped field, impregnation, trapped field distribution, critical caracteristics, Jc/B curves, reinforcement
Eisterer M., Weber H.W., Chaud X., Gawalek W., Sokolovsky V., Litzkendorf D., Noudem J., Dellith J., Prikhna T., Dittrich U., Moshchil V., Tkach V., Kozyrev A., Karau F., Shmidt C., Karpets M., Kovylaev V., Borimskiy A., Kuznietsov R., Basyuk T.
Ключевые слова: MgB2/Ag, bulk, phase diagram, phase composition, fabrication, critical caracteristics, Jc/B curves, in-situ process
Ключевые слова: HTS, YBCO, bulk, single-domain, holes, trapped field distribution, reinforcement, impregnation, fabrication
Ключевые слова: HTS, bulk, holes, powder processing, ferromagnetic material, magnetic properties, trapped field, magnetization, experimental results, numerical analysis, comparison
Ключевые слова: power equipment, SMES, HTS, tapes, aspect ratios, design parameters, geometry effects, numerical analysis
Chaud X., Wang L., Nishijima G., Awaji S., Watanabe K., Mossang E., Zhang X., Ma Y., Gao Z., Wang D., Qi Y., Zhang Z.
Ключевые слова: HTS, YBCO, holes, bulk, texture, patterning, infiltration process, fabrication, microstructure, trapped field distribution, critical caracteristics, Jc/B curves, presentation
Eisterer M., Weber H.W., Chaud X., Diko P., Sefcikova M., Yao X., Zmorayova K., Chen I., Antal V., Kovac J.
Eisterer M., Weber H.W., Chaud X., Diko P., Horhager N., Zehetmayer M., Antal V., Kanuchove M., Sefcikove M., Kovec J.
Ключевые слова: HTS, YBCO, bulk, doping effect, oxygenation treatments, single grain, fabrication, critical caracteristics, Jc/B curves, critical temperature, pinning force
Eisterer M., Weber H.W., Chaud X., Diko P., Horhager N., Zehetmayer M., Antal V., Kanuchove M., Sefcikove M., Kovec J.
Ключевые слова: HTS, YBCO, bulk, doping effect, heat treatment, single grain, microstructure, critical current, critical temperature, Jc/B curves, fabrication, experimental results
Eisterer M., Weber H.W., Chaud X., Diko P., Sefcikova M., Horhager N., Zehetmayer M., Kanuchova M., Antal V., Kovac J.
Ключевые слова: HTS, YBCO, bulk, single-domain, oxygenation treatments, pressure effect, trapped field distribution, magnetic properties
Tixador P., Chaud X., Porcar L., Soubeyroux J.L., Chaudouet P., Odier P., Allais A., Morlens S., Jimenez C., Ortega L., Millon C., Pairis S.
Ключевые слова: HTS, coated conductors, substrate cylindrical, substrate Ni-W, RABITS process, buffer layers, MOD process, YBCO, MOCVD process, microstructure, resistive transition, fabrication, new
Chaud X., Gawalek W., Vajda I., Habisreuther T., Litzkendorf D., Prikhna T.A., Bierlich J., Moshchil V.E., Sverdun V.B., Sergienko N.V., Rabier J., Savchuk Y.M., Dub S.N., Melnikov V.S., Nagorny P.A., Joulain A., Kosa J.
Ключевые слова: HTS, YBCO, bulk, fabrication, control systems, susceptibility, in-situ process, phase formation, magnetic properties
Ключевые слова: HTS, YBCO, bulk, oxygenation treatments, high pressure processing, fabrication, disks, single-domain
Ключевые слова: HTS, YBCO, bulk, single-domain, pulsed magnetization, trapped field, flux pumps, temperature dependence, disks, magnetic properties
Ключевые слова: HTS, YBCO, bulk, fabrication, oxygenation treatments, microstructure
Ключевые слова: HTS, YBCO, bulk, fabrication, oxygenation treatments, microstructure, crack formation, Jc/B curves, pinning force, critical caracteristics
Chaud X., Gawalek W., Habisreuther T., Litzkendorf D., Prikhna T.A., Bierlich J., Moshchil V.E., Sergienko N.V., Rabier J., Savchuk Y.M., Dub S.N., Melnikov V.S., Joulain A.
Ключевые слова: HTS, YBCO, bulk, oxygenation treatments, crack formation, Jc/B curves, critical caracteristics, hardness, mechanical properties, microstructure, fabrication
Chaud X., Gawalek W., Habisreuther T., Litzkendorf D., Prikhna T.A., Bierlich J., Moshchil V.E., Sverdun V.B., Sergienko N.V., Vlasenko A.V., Rabier J., Savchuk Y.M., Melnikov V.S., Joulain A., Dub S.S.
Ключевые слова: HTS, YBCO, bulk, fabrication, oxygenation treatments, mechanical properties, Jc/B curves, microstructure, critical caracteristics
Ключевые слова: HTS, YBCO, bulk, crack formation, perforated sample structure, trapped field distribution, experimental results, magnetic properties
Tournier R., Sulpice A., Bourgault D., Porcar L., Chateigner D., Diko P., Chaud X.(xavier.chaud@grenoble.cnrs.fr), Villaume A.
Weber H.W., Chaud X., Haindl S., Hengstberger F.(hengstb@ati.ac.at)
Ключевые слова: HTS, YBCO, bulk, single-domain, oxygenation treatments, perforated sample structure, trapped field, experimental results, magnetic properties
Chaud X., Noudem J.G.(noudem@ismra.fr), Meslin S., Harnois C., Chateigner D.
Ключевые слова: FCL resistive, HTS, bulk, YBCO, perforated sample structure, fabrication, power equipment, new
Eisterer M., Weber H.W., Chaud X., Tournier R., Gawalek W., Krabbes G., Murakami M., Freyhardt H.C., Leenders A., Fuchs G., Zeisberger M., Babu N.H., Gonzalez-Arrabal R., Cardwell D.A.(dc135@cam.ac.uk)
Ключевые слова: HTS, REBCO, bulk, impregnation, trapped field, Hall sensor, measurement technique, experimental results, magnetic properties
Tixador P., Isfort D., Chaud X., Tournier R., Porcar L., Buzon D.(buzon@caps.fsu.edu)
Ключевые слова: FCL resistive, HTS, bulk, YBCO, experimental results, power equipment, recovery characteristics
Buzon D., Tixador P., Porcar L.(porcar@labs.polycnrs-gre.fr), Isfort D., Chaud X., Tournier R.
Ключевые слова: FCL resistive, HTS, YBCO, meander, heat transfer, experimental results, power equipment, magnetic properties
Buzon D., Tixador P., Isfort D., Chaud X., Bourgault D., Tournier R.F.(tournier@polycnrs-gre.fr), Floch E., Porcar L.
Ключевые слова: HTS, YBCO, bulk, fabrication, resistivity, current limiting characteristics, experimental results, magnetic properties
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.